Error code
Refrigerator error code H
Frigidaire refrigerator error code H: The cabinet has been warmer than it should be for long enough to say so out loud, and the maker's own list of causes is the honest one: a door left open, a setting somebody changed, a seal that no longer closes. Which machines can raise it, what the maker publishes about it, and what to do next.
- From $89 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code H, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
H
The cabinet has been warmer than it should be for long enough to say so out loud, and the maker's own list of causes is the honest one: a door left open, a setting somebody changed, a seal that no longer closes. In South Florida the third of those does the most work — humid air entering all day past a hardened gasket is what buries an evaporator coil and starts a defrost problem on a system that was working. Worth knowing before the alarm is silenced: on these cabinets the highest temperature reached is displayed when the alert is first acknowledged, and that number is evidence.
or call (305) 615-5496
What it narrows down to
High temp will illuminate next to clear alerts button. Alarm is played every 60 seconds. The recommended settings for a product installed in a kitchen is 37˚F for the refrigerator and 0˚F for the freezer.
Diagnostic
From $89, credited to the repair
On the same appliance
What else belongs to the refrigerators
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Indicates there is ice jammed in the chute. An alarm will sound when a cube is stuck in the chute too long. Ice has melted and frozen around the auger due to infrequent use, temperature fluctuations, and/or power outages.
The Sabbath Mode is a feature that disables portions of the refrigerator and its controls in accordance with observance of the weekly Sabbath and religious holidays. NOTE: In the Sabbath Mode, the High Temp alarm is active for health reasons.
The same digits mean different things on different equipment. Search the full code list
In more detail
About Refrigerator error code H
What H means on this make
The cabinet has been warmer than it should be for long enough to say so out loud, and the maker's own list of causes is the honest one: a door left open, a setting somebody changed, a seal that no longer closes. In South Florida the third of those does the most work — humid air entering all day past a hardened gasket is what buries an evaporator coil and starts a defrost problem on a system that was working. Worth knowing before the alarm is silenced: on these cabinets the highest temperature reached is displayed when the alert is first acknowledged, and that number is evidence.
The other ways this one is printed
H · HI
The same condition is printed differently on different panels of the same make, and every spelling the maker publishes for it is above. Whichever of them you searched for, this is the right page.
Where this appears, and why not to clear it
On the appliance's own display, as a short single code — a letter and a number, or two letters. Nothing alternates and nothing arrives in halves on this make, so what the panel shows is the whole of it. Photograph it before you cut the power. This maker's own answer to most of these is thirty seconds at the breaker, and that is worth following once — but a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again.
What to do about it
- Read the highest temperature the display offers when you acknowledge the alert, and write it down. It is thrown away when the alarm is cleared.
- Check the doors closed and nothing is holding a drawer or a bin proud of the frame.
- Check the settings are 37°F and 0°F, which is what the maker recommends for a kitchen.
- Close a dollar bill in the door and pull: anywhere it slides out freely is a gap letting warm wet air in, and in this climate that is the usual answer.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 615-5496 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards