Miami-Dade · South Florida
Frigidaire repair in Miami
Everything from a 1950s house in the north to a new tower downtown, which is why we ask for the model and the building before quoting a range rather than after.
We cover Miami and the rest of Miami-Dade: an on-site diagnostic first, the price agreed in writing before anything is opened, and the exact figure confirmed once we have seen the unit.
By unit
What we repair in Miami, by Frigidaire unit
Start with whichever matches yours. How an appliance is installed shapes the visit as much as the repair does, which is why we ask about it when you book.
-
Countertop · portable · bullet ice Frigidaire ice machine repair in Miami
Three models, all of them countertop: a portable machine you fill from a jug that makes bullet ice in a few minutes. It is worth being exact about that, because the phrase 'ice machine' means an undercounter cabinet with a drain and a condenser on other makes in this trade, and Frigidaire builds none. These are small appliances with a pump, a compressor, an evaporator of steel fingers and a water reservoir, and they fail in small-appliance ways: scale, a pump that has lost prime, a sensor that thinks the basket is full.
- Three countertop machines — this make builds no undercounter ice cabinet
- Bullet ice from a filled reservoir, not a plumbed circuit
- Scale, pump priming and the full-basket sensor cause most of it
-
Single · double · microwave combination Frigidaire oven repair in Miami
Fifty wall ovens: 24 single, 16 double and ten microwave combinations. Unlike the freestanding range, these are built into a cabinet column, and that changes the job before anyone touches the appliance — the oven has to come out on its runners to be worked on, the cabinet has to take the weight, and on a double oven the upper cavity is at head height. The problems themselves are the familiar ones: heating, the sensor and calibration, the door and its hinges, and the lock that has to release before the door will open.
- 50 cavities — 24 single, 16 double, ten microwave combinations
- Built into a column, so access is planned before the visit rather than found
- Heating, sensor and calibration, door hinges and the lock
-
Beverage centers · wine storage Frigidaire wine cooler repair in Miami
Seven cabinets, and they are beverage centers and wine storage rather than the multi-zone cellars the luxury makes in this fleet sell. They go under a counter or into a bar run, they are usually glass-doored, and in South Florida they spend the year fighting the room: warm ambient, a glass door that gains heat, and a compressor sized for a small cabinet. The complaints follow from that — not holding temperature in the afternoon, condensation on the inside of the glass, a fan that has become loud.
- Seven cabinets — beverage centers and wine storage, not multi-zone cellars
- A glass door in a warm room is the whole thermal problem in one part
- Not holding temperature, condensation and fan noise are the three calls
-
Gas · electric radiant · induction Frigidaire cooktop repair in Miami
Thirty-one cooktops, near enough evenly split: 12 gas, 11 electric radiant and eight induction. Dropped into a worktop, they are the appliance most likely to be damaged by something other than a problem — a cracked ceramic top from a dropped pan, a spill that has reached the switches, a burner cap put back wrong after a clean. The genuine failures are the elements and their switches on radiant, the igniters and valves on gas, and the coils, fans and power board on induction.
- 31 cooktops — 12 gas, 11 radiant, eight induction
- Cracked glass and spills into the switchgear are as common as real problems
- Induction is one third of the line and is repaired quite differently
-
Built-in · front control · plastic and stainless tub Frigidaire dishwasher repair in Miami
Thirty-six machines, from the plain front-control model that fills a builder's kitchen to the Gallery and Professional trims with a third rack. This is the appliance where the difference between series is smallest: the same platform, a different fascia and a quieter tub. What we attend is consistent because of that — not draining, not cleaning, not drying, and water where it should not be. The filter and the spray arms account for more of it than any electrical part does, which is why the first questions are about what is at the bottom of the tub.
- 36 machines across three trims on much the same platform
- Not draining, not cleaning, not drying, leaking — four complaints, one machine
- The filter and the spray arms explain more calls than any board ever does
-
Top freezer · French door · side by side Frigidaire refrigerator repair in Miami
The deepest branch of this catalog by a distance: 142 cabinets, and the largest single family in everything Frigidaire currently sells is the plain top-freezer refrigerator — 55 of them. That number is the brand in one line. This is the refrigerator that came with the apartment, and half our calls are for a cabinet nobody chose. French door adds 44 and side-by-side 31, which is where the ice and water go wrong, and the two-cabinet compact and bottom-freezer families are small enough to name individually. In this climate the work concentrates on defrost, on door seals that never fully dry, and on condensers that live in salt air.
- 142 cabinets across five layouts — top freezer is the biggest family in the catalog
- French door and side-by-side bring the ice and water circuits most calls are about
- Defrost, seals and condensers do most of the failing in South Florida
By job
The repairs we are called out for in Miami
Starting figures for this equipment in South Florida. What moves them is the model, the access and the part — the exact cost is confirmed after the on-site diagnostic.
-
from $245 Control board repair
The board is the part most often blamed and least often to blame. A machine that is dead, resetting, or ignoring half its own panel usually has a supply problem, a failed sensor or a connector that has corroded in this humidity — and all three imitate a failed board convincingly. We measure what reaches the board before quoting one, because on this badge a board is frequently a large share of what the appliance is now worth.
- Measured before it is quoted: supply, sensors and connectors first
- Humidity corrodes connectors here, and that looks exactly like a dead board
- On an older machine the board is compared with the value of the appliance, out loud
-
from $245 Washer motor and drive repair
A drum that does not turn, turns in one direction only, or turns while the machine screams. On the belt-driven machines this badge sold, a belt and an idler are an ordinary repair; on the direct-drive machines it is the rotor, the stator or the control that drives them. Which one you have decides both the price and whether the job is worth doing at all.
- Belt and idler on the older machines, rotor and stator on the newer
- A drum that turns by hand with resistance is a bearing, not a motor
- The price gap between the two designs is wide and is quoted before work
-
from $109 Condenser cleaning
The cheapest thing that can be done to a refrigerator in South Florida, and the one most often skipped. A condenser matted with dust and pet hair cannot reject heat, so the compressor runs longer, the cabinet drifts in the afternoon and the machine ages years in a summer. On a garage freezer or a beverage cabinet built into a cabinet run it matters more still, because the air around them is warmer to begin with.
- The most preventable refrigeration failure there is in this climate
- Long run times and afternoon drift are the symptoms it fixes
- Worth booking with other work rather than alone
-
from $139 Dryer not heating repair
No heat at all, or clothes that come out warm and damp. The first thing we establish is whether the machine is failing to make heat or failing to move air, because in South Florida the second is far more common and no part fitted will fix it. Where it is genuinely heat, an electric machine and a gas machine are two different repairs.
- Airflow before heat: it is the commoner answer here by a distance
- A thermal cutout that has opened is a symptom, and we find out why
- Electric and gas are different visits — tell us which you have
-
from $139 Upright and chest freezer repair
Standalone freezers in this climate mostly live in a garage or a utility room, which is the single most useful fact about repairing them: they are being asked to work at an ambient the cabinet was never rated for. An upright is frost-free and fails in the interesting ways — defrost, fan, control; a chest freezer is manual defrost and usually fails at the thermostat, the seal or the lid.
- Ambient first: a garage in August is not the room the cabinet was designed for
- Upright failures are defrost and air; chest failures are thermostat, seal and lid
- A freezer running warm announces nothing, so the visit starts with measurement
-
from $105 Dryer moisture sensor service
Automatic cycles that stop with the load still damp, or run to the maximum every time. The sensor is two metal strips in the drum that read the resistance of wet fabric, and they get coated by fabric softener until they cannot read anything. It is a five-minute clean far more often than it is a part, which is exactly why it is worth booking rather than living with.
- Cycles that end damp or never end at all point at the sensor
- Fabric softener film is the usual cause, not a failed part
- Often a clean rather than a repair — and we will tell you that
Nearby
Where else we work near Miami
Every place below has its own page, with what the equipment and the access are like there.
Neighborhoods in Miami
Elsewhere in Miami-Dade
In more detail
Frigidaire repair in Miami, in more detail
What Frigidaire equipment is like in Miami
Everything from a 1950s house in the north to a new tower downtown, which is why we ask for the model and the building before quoting a range rather than after.
Miami sits in Miami-Dade County, and the equipment here follows the housing: older kitchens with appliances fitted into openings that were cut for something else, and newer ones where they were specified with the cabinetry. Both are Frigidaire work — cooktop, dishwasher, dryer — and both are diagnosed on site before anything is priced.
Heat, dust and power cuts — what they do to a kitchen full of appliances
Inland the enemy is heat, dust and grease rather than salt. Condensers run hard for more months of the year here than almost anywhere else in the country, and grease that condenses in a hood liner instead of leaving through it comes back as a fan that labors. In Miami the appliances we are called out to are usually working exactly as designed — in conditions nobody designed them for.
What that means for the appliances in Miami
- Wall ovens — A wall oven in a tower is trimmed into a cabinet run with the building behind it, so removing it is planned rather than improvised, and the association usually wants notice before it happens.
- Dryers — A condensation dryer exists because this kind of building does — nothing vents through an exterior wall, so the water goes to a drain or a tank instead. It also means a kinked condensate hose behind a stacked pair reads exactly like a dead heating element.
- Refrigerators — The cabinetry in these houses is frequently worth more than the appliance inside it, so panels come off carefully and go back true — which is time, and we plan for it.
- Fridge warm, freezer cold
- Dryer not heating
- Ice maker not making ice
- Oven temperature is wrong
- Dishwasher not draining
How a visit in Miami is arranged
We ask for the model number from the plate inside the door and a line about what the appliance is doing. That decides which parts ride in the van, and it is the difference between one appointment and two.
- How the appliance is built in, and whether it has ever been pulled out before
- Whether there is a second one — a bar, a pantry, a garage or an outdoor kitchen
- Whether the doors are paneled to match the cabinetry, which changes how they come off and go back
- The diagnosis first, then the scope and the price in writing, and your approval before anything is opened
What it costs, and what moves the figure
Prices in Miami are the same as everywhere else we cover: a diagnostic from $89 that is credited toward the repair, and starting figures per job rather than one number for "a repair". What moves it is the model, how the appliance is built into the cabinetry, which part it needs and how quickly that part can be sourced — none of which can be judged over the phone. The repairs we carry out lists what each job involves and the figure it starts at, and the unit pages covers what tends to go wrong on each type.
The exact cost is confirmed after the on-site diagnostic and agreed with you before any work begins. We are an independent repair company — not affiliated with, authorized by, or endorsed by any manufacturer — and our warranty covers the labor we performed.
Before you book
Questions about a visit in Miami
Do you cover Miami?
Yes. Miami is in Miami-Dade County and inside the area we work every week. Give us the address when you book, and say how the Frigidaire is installed — what has to come apart to reach it matters as much as where it is.
How soon can you get to Miami?
We will tell you the earliest slot we can genuinely keep rather than the earliest one that sounds good. Tell us the model number and what the unit is doing when you book: whether we can finish the same day depends on the part far more than on the drive.
Does it cost more because the job is in Miami?
No. The diagnostic and the work are priced the same across Miami-Dade, Broward and Palm Beach. What moves the figure is the model, how the unit is built in and which part it needs — never the address. Where access takes longer, we say so before anything is agreed rather than after.
My building has rules about service calls. What do you need?
The building name when you book, and anything it requires — a service elevator window, a loading bay slot, approved hours or a certificate of insurance. We arrange those in advance; found out on the day, they cost the appointment.
Booking a visit in Miami
Tell us the model number and what the unit is doing. We will bring the parts that problem usually needs, and you will have a firm price before we start.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards