FrigidaireRepair Miami
(305) 615-5496 Book a visit

Miami-Dade · South Florida

Frigidaire repair in Palmetto Bay

Larger houses, often with more than one of the same appliance and a second run of them well away from the main kitchen. Telling us which one is misbehaving saves a visit.

We cover Palmetto Bay and the rest of Miami-Dade: an on-site diagnostic first, the price agreed in writing before anything is opened, and the exact figure confirmed once we have seen the unit.

Book a diagnostic (305) 615-5496

By unit

Start with whichever matches yours. How an appliance is installed shapes the visit as much as the repair does, which is why we ask about it when you book.

  • A white two-door top-freezer refrigerator standing at the end of a run of plain white builder cabinets in a bright condominium kitchen, freezer door above and fresh-food door below, plain flat handles.
    Top freezer · French door · side by side

    Frigidaire refrigerator repair in Palmetto Bay

    The deepest branch of this catalog by a distance: 142 cabinets, and the largest single family in everything Frigidaire currently sells is the plain top-freezer refrigerator — 55 of them. That number is the brand in one line. This is the refrigerator that came with the apartment, and half our calls are for a cabinet nobody chose. French door adds 44 and side-by-side 31, which is where the ice and water go wrong, and the two-cabinet compact and bottom-freezer families are small enough to name individually. In this climate the work concentrates on defrost, on door seals that never fully dry, and on condensers that live in salt air.

    • 142 cabinets across five layouts — top freezer is the biggest family in the catalog
    • French door and side-by-side bring the ice and water circuits most calls are about
    • Defrost, seals and condensers do most of the failing in South Florida
    Refrigerator repair
  • A freestanding stainless electric range with a smooth black ceramic top slotted between white builder cabinets, oven door closed, plain bar handle.
    Electric · gas · induction · dual fuel

    Frigidaire range repair in Palmetto Bay

    Eighty ranges, and all four fuels: 35 electric, 31 gas, 12 induction and two dual-fuel. That induction figure matters — this is not a make where the technology is absent, and a page or a photograph that pretended otherwise would be wrong about the catalog. The freestanding range is what most Frigidaire kitchens have, which means the appliance can be pulled out, the service access is decent and the parts channel is wide. What we attend divides cleanly: the cooking surface, the oven cavity, and the control that runs both.

    • 80 ranges across electric, gas, induction and dual fuel
    • Induction is genuinely part of this catalog — 12 ranges
    • Freestanding means real service access and a wide parts channel
    Range repair
  • A stainless front-control dishwasher built into a white cabinet run with its door dropped open and both racks pulled out, plain white plates and glasses loaded, a stainless tub interior.
    Built-in · front control · plastic and stainless tub

    Frigidaire dishwasher repair in Palmetto Bay

    Thirty-six machines, from the plain front-control model that fills a builder's kitchen to the Gallery and Professional trims with a third rack. This is the appliance where the difference between series is smallest: the same platform, a different fascia and a quieter tub. What we attend is consistent because of that — not draining, not cleaning, not drying, and water where it should not be. The filter and the spray arms account for more of it than any electrical part does, which is why the first questions are about what is at the bottom of the tub.

    • 36 machines across three trims on much the same platform
    • Not draining, not cleaning, not drying, leaking — four complaints, one machine
    • The filter and the spray arms explain more calls than any board ever does
    Dishwasher repair
  • The inside of a top-freezer compartment with its door open, a white plastic ice maker module mounted on the left wall with its wire shut-off arm in the down position and a clear bin of cubes below it.
    In the refrigerator · in the freezer door

    Frigidaire ice maker repair in Palmetto Bay

    This page is about the ice maker inside the refrigerator, because that is where Frigidaire puts them. The catalog has no undercounter ice cabinet at all — the standalone machines are three countertop appliances, and they have their own page. What we are called out for here is the module in a French door or side-by-side cabinet: no ice, hollow or half-formed cubes, a bin that has frozen into one block, or a dispenser that grinds and delivers nothing. The water side of that circuit — filter, valve, line — causes more of it than the module itself.

    • The module inside the refrigerator, which is where this make puts it
    • No ice, hollow cubes, a frozen bin and a dispenser that grinds — one circuit, four faces
    • The problem is on the water side more often than in the ice maker
    Ice maker repair
  • A four-zone black ceramic induction cooktop set flush into a pale quartz counter in a bright kitchen, the zone outlines just visible on the dark glass, one stainless pan standing on the front left zone.
    Gas · electric radiant · induction

    Frigidaire cooktop repair in Palmetto Bay

    Thirty-one cooktops, near enough evenly split: 12 gas, 11 electric radiant and eight induction. Dropped into a worktop, they are the appliance most likely to be damaged by something other than a problem — a cracked ceramic top from a dropped pan, a spill that has reached the switches, a burner cap put back wrong after a clean. The genuine failures are the elements and their switches on radiant, the igniters and valves on gas, and the coils, fans and power board on induction.

    • 31 cooktops — 12 gas, 11 radiant, eight induction
    • Cracked glass and spills into the switchgear are as common as real problems
    • Induction is one third of the line and is repaired quite differently
    Cooktop repair
  • A white front-loading vented dryer in a narrow laundry closet with its door swung open, an empty stainless drum inside and a flexible foil duct visible behind the machine going into the wall.
    Electric · gas · stacked centers

    Frigidaire dryer repair in Palmetto Bay

    Four dryers and three laundry centers in the current line, and every one of them vented — there is no heat-pump dryer under this badge. In South Florida the vent is most of the story: a duct that runs further than it should, through a wall into a corridor or up through a building, collecting lint at every bend. A dryer that takes two cycles to dry a load is almost never a broken dryer, and saying so before selling a part is the difference between a repair and a sale. The genuine problems, when they come, are the element or the burner, the thermostat and the cutout, the drum rollers and the belt.

    • Every dryer here is vented — no heat-pump machine under this badge
    • Long duct runs and lint explain more slow-drying calls than any part does
    • Element or burner, cutouts, rollers and belt are the real failures
    Dryer repair

By job

Starting figures for this equipment in South Florida. What moves them is the model, the access and the part — the exact cost is confirmed after the on-site diagnostic.

  • A chest freezer standing in a dark garage with its lid propped fully open, two wire baskets lifted out onto the concrete beside it, a multimeter lying on the closed half of the lid with its face turned away.
    from $139

    Upright and chest freezer repair

    Standalone freezers in this climate mostly live in a garage or a utility room, which is the single most useful fact about repairing them: they are being asked to work at an ambient the cabinet was never rated for. An upright is frost-free and fails in the interesting ways — defrost, fan, control; a chest freezer is manual defrost and usually fails at the thermostat, the seal or the lid.

    • Ambient first: a garage in August is not the room the cabinet was designed for
    • Upright failures are defrost and air; chest failures are thermostat, seal and lid
    • A freezer running warm announces nothing, so the visit starts with measurement
    What this involves
  • The coiled heating element in its open metal can lifted out of the back of a dryer and held level, the empty duct opening behind. The element and the duct in one frame, which is the order this page insists on.
    from $139

    Dryer not heating repair

    No heat at all, or clothes that come out warm and damp. The first thing we establish is whether the machine is failing to make heat or failing to move air, because in South Florida the second is far more common and no part fitted will fix it. Where it is genuinely heat, an electric machine and a gas machine are two different repairs.

    • Airflow before heat: it is the commoner answer here by a distance
    • A thermal cutout that has opened is a symptom, and we find out why
    • Electric and gas are different visits — tell us which you have
    What this involves
  • The base grille of a refrigerator removed and leaning against the cabinet, a coil brush and a vacuum nozzle worked in among the black condenser fins behind it, a grey mat of dust drawn out onto near-black tile.
    from $109

    Condenser cleaning

    The cheapest thing that can be done to a refrigerator in South Florida, and the one most often skipped. A condenser matted with dust and pet hair cannot reject heat, so the compressor runs longer, the cabinet drifts in the afternoon and the machine ages years in a summer. On a garage freezer or a beverage cabinet built into a cabinet run it matters more still, because the air around them is warmer to begin with.

    • The most preventable refrigeration failure there is in this climate
    • Long run times and afternoon drift are the symptoms it fixes
    • Worth booking with other work rather than alone
    What this involves
  • A large flat magnet rotor lifted off the back of a washing machine's outer tub ... the ring of stator windings still bolted to the tub behind it.
    from $245

    Washer motor and drive repair

    A drum that does not turn, turns in one direction only, or turns while the machine screams. On the belt-driven machines this badge sold, a belt and an idler are an ordinary repair; on the direct-drive machines it is the rotor, the stator or the control that drives them. Which one you have decides both the price and whether the job is worth doing at all.

    • Belt and idler on the older machines, rotor and stator on the newer
    • A drum that turns by hand with resistance is a bearing, not a motor
    • The price gap between the two designs is wide and is quoted before work
    What this involves
  • A green control board lifted out of an appliance and laid on a gray antistatic mat, two ribbon connectors still trailing back into the opening, relays and a large capacitor across it.
    from $245

    Control board repair

    The board is the part most often blamed and least often to blame. A machine that is dead, resetting, or ignoring half its own panel usually has a supply problem, a failed sensor or a connector that has corroded in this humidity — and all three imitate a failed board convincingly. We measure what reaches the board before quoting one, because on this badge a board is frequently a large share of what the appliance is now worth.

    • Measured before it is quoted: supply, sensors and connectors first
    • Humidity corrodes connectors here, and that looks exactly like a dead board
    • On an older machine the board is compared with the value of the appliance, out loud
    What this involves
  • The door lock unit of a front-load washing machine drawn out of its cutout in the front panel and hanging on its wiring loom, the rubber boot folded aside, a torch on the floor lighting the opening from below.
    from $139

    Washer door lock repair

    A front-loader that will not start, will not unlock, or stops mid-cycle with the door light flashing. The lock is a safety interlock and the machine will not run without it, so this is another case where a refusal is the appliance being right. On older machines the lock is also one of the parts that has genuinely worn out rather than failed suddenly.

    • The machine is refusing on purpose: the lock is an interlock
    • Mid-cycle stops with a flashing door light point here first
    • On older machines this is wear, not a sudden failure
    What this involves

Nearby

Where else we work near Palmetto Bay

Every place below has its own page, with what the equipment and the access are like there.

Elsewhere in Miami-Dade

See the whole service area

In more detail

Frigidaire repair in Palmetto Bay, in more detail

What Frigidaire equipment is like in Palmetto Bay

Larger houses, often with more than one of the same appliance and a second run of them well away from the main kitchen. Telling us which one is misbehaving saves a visit.

Palmetto Bay sits in Miami-Dade County, and the equipment here follows the housing: older kitchens with appliances fitted into openings that were cut for something else, and newer ones where they were specified with the cabinetry. Both are Frigidaire work — cooktop, dishwasher, dryer — and both are diagnosed on site before anything is priced.

Heat, dust and power cuts — what they do to a kitchen full of appliances

Inland the enemy is heat, dust and grease rather than salt. Condensers run hard for more months of the year here than almost anywhere else in the country, and grease that condenses in a hood liner instead of leaving through it comes back as a fan that labors. In Palmetto Bay the appliances we are called out to are usually working exactly as designed — in conditions nobody designed them for.

What that means for the appliances in Palmetto Bay

  • Houses here often run more than one of the same appliance, and the second one is the one that goes unnoticed longest. If there is a second at the address, say so when you book — seeing both on one visit costs less than two visits.

How a visit in Palmetto Bay is arranged

We ask for the model number from the plate inside the door and a line about what the appliance is doing. That decides which parts ride in the van, and it is the difference between one appointment and two.

  • How the appliance is built in, and whether it has ever been pulled out before
  • Whether there is a second one — a bar, a pantry, a garage or an outdoor kitchen
  • Whether the doors are paneled to match the cabinetry, which changes how they come off and go back
  • The diagnosis first, then the scope and the price in writing, and your approval before anything is opened

What it costs, and what moves the figure

Prices in Palmetto Bay are the same as everywhere else we cover: a diagnostic from $89 that is credited toward the repair, and starting figures per job rather than one number for "a repair". What moves it is the model, how the appliance is built into the cabinetry, which part it needs and how quickly that part can be sourced — none of which can be judged over the phone. The repairs we carry out lists what each job involves and the figure it starts at, and the unit pages covers what tends to go wrong on each type.

The exact cost is confirmed after the on-site diagnostic and agreed with you before any work begins. We are an independent repair company — not affiliated with, authorized by, or endorsed by any manufacturer — and our warranty covers the labor we performed.

Before you book

Questions about a visit in Palmetto Bay

Do you cover Palmetto Bay?

Yes. Palmetto Bay is in Miami-Dade County and inside the area we work every week. Give us the address when you book, and say how the Frigidaire is installed — what has to come apart to reach it matters as much as where it is.

How soon can you get to Palmetto Bay?

We will tell you the earliest slot we can genuinely keep rather than the earliest one that sounds good. Tell us the model number and what the unit is doing when you book: whether we can finish the same day depends on the part far more than on the drive.

Does it cost more because the job is in Palmetto Bay?

No. The diagnostic and the work are priced the same across Miami-Dade, Broward and Palm Beach. What moves the figure is the model, how the unit is built in and which part it needs — never the address. Where access takes longer, we say so before anything is agreed rather than after.

What do you need from me before the visit in Palmetto Bay?

The model number from the data plate, a photograph of the display if anything is showing on it, and a line about what the unit is doing. Those three decide which parts a technician brings, and they are the difference between one visit and two.

Booking a visit in Palmetto Bay

Tell us the model number and what the unit is doing. We will bring the parts that problem usually needs, and you will have a firm price before we start.

Schedule a visit Call (305) 615-5496

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards
Call (305) 615-5496